Studio Drummer – Foundations!

Miles Davis was once asked what were the raw essentials of having a great band. Miles replied, you have to have a great drummer. The interviewer then asked, what if you don’t have a great drummer? Miles replied,
YOU DON’T HAVE A BAND!

At e-studio-drummer we like to break down important aspects that are often overlooked. Often these aspects are overlooked to looked for different reasons. Inexperience is the first stumbling block. Trying to prematurely look ‘cool’ is often the biggest culprit. While sometimes this can work in your favor more often it’s an impediment.

YOU are the foundation of the music. Of course this works in concert with the rhythm section as well. But think of it as building a house. You are the framer. But first and foremost you are the creator of the foundation. The foundation is literally and figuratively the ‘bottom line’.
Very precise! In e-studio-drummer mentality, you are ‘framing a house’. Inches and fractions of inches matter, akin to the literal foundation and co-framer of a house.
If you alone, are out by an inch or less creating this foundation, by the time you get 2 stories up in the framing of a house you’ve got major problems.
For eg. If you screw up the measurement or the cut of an important structural beam, you’ve screwed up the house’s structure exponentially as the construction above this mistake continues! In our case, the ‘construction’ above us are the live band members and/or overdubs that are being added on top of the foundation you’re creating.

Of course we are human and not perfect. But we all continue to strive for more precision AND more creativity. Great creativity and fluidity is not that far off from plum lines, leveling and measuring.
But it all starts at this foundational level.

Give a lot of attention to note length. Discover and practice note duration. If you’re underpinning a large band for example and you have pauses and rests in the music you have to understand note length. I played brass for years before drums which was a great foundation for this aspect. Be aware of this very important aspect.

Being second nature with a click track or metronome is the bedrock of this. Burning note length into your head is not only when you’re playing and controlling a band large or small. It’s also when you’re resting for 2 beats, a bar or more. Learn how to perhaps mark enough time for the band members if necessary. If someone tends to rush or drag for example, mark time with perhaps a light hi hat to keep everyone on the same page

For starters, a physical aspect,

Thinking of our focus on foundation you have to have a solid throne. Have you ever observed a pianist and how they will meticulously adjust their throne/stool height and positioning so as to maximize their performance, endurance and musicality?
We have this very important foundational issue as well. When we have 4 limbs in motion often with a huge amount of physicality you have to have this obvious but so often overlooked piece of gear nailed.

ONCE YOU HAVE A VERY SOLID UNDERSTANDING OF THIS FOUNDATIONAL LEVEL YOU CAN START TO ‘MOVE’ ASPECTS OF THE INSTRUMENT WITH FULL INTENTION, AS IN ‘BACKBEATS’ETC

More discussion on this aspect coming from e-studio-drummer.com!

Share : facebooktwittergoogle plus
pinterest

Studio Drummer – Another example of a ‘time flip’

As another studio drummer addition to the last post here is another very clever ‘time flip’this time by The Eagles.
It’s very subtle but is such a clever songwriting twist that adds an element of interest. And I have more examples of this to come!

TAKE IT EASY by The Eagles;
Listen to this intro and there is something very interesting about it. Important thing to note in this instance. The ‘time’is all rooted in the guitars. There is no drum indication of where 2 and 4 is!

It can be interpreted as making sense musically in both of these examples… Until you hit the downbeat of verse 1!
For eg. Interpret the guitar intro as landing on beat 1 and listen through until the beginning of the verse. Do you hear the problem? You’re late entering the verse by an 1/8 note.

Then hear it the right way! The intro, correctly played is an 1/8 note push into beat one of the 8 bar song intro.

As an e-studio-drummer tip? Practice hearing this intro both ways for your own protection first and foremost.
Especially if you’ve heard the song for years, it’s a good thing to do!

Sounds intentional on Beat 1, drums are hitting downbeats and guitars are playing upbeats. But note how they don’t really (cleverly) indicate a real 2 and 4. So you continue on in peril.

Everything grooves perfectly. Until you come out of the intro an 1/8 beat late into the first verse!

Then here’s the same thing again!
Hear it this time as an 1/8 note push into beat one;

The track (and drum) pushes are an 1/8 note before beat 1 and the guitars are downbeats. It lands perfectly after 4 bars on beat one of the verse.

My Point is it’s deceptive how you can hear this intro BOTH ways as being very musical and intentional!

It’s a matter of a single 1/8 note of understanding! A single fraction that can turn the band upside down once you fill into the verse and you’re out of a job.

What I find interesting is the intentional aspect of this in the songwriting. I absolutely believe this is intentional to make the listener float somewhat and perhaps not be able to identify where the downbeat is but… once it lands it’s so simple, yet engaging.

More from e-studio-drummer.com

Share : facebooktwittergoogle plus
pinterest

Studio Drummer – Tricks For Tendonitis

We musicians and studio players are all prown to have repetitive motion issues!  Guitar players have it bad as well.  I had an issue with my shoulder for a couple of years.  It was very painful to play anything above shoulder height.  Since then I’ve had very deep tendonitis in my right forearm.  It’s been a constant bother.

I did find an answer though.  It was not a medical centre, pills or anti-inflam’s.  For me it was topical extra strength Voltarin anti-inflamatory cream that my doc recommended I try.  There is a light version and an extra strength version.  It made a remarkable difference right away!  And by using it on an ongoing basis it helped my body get ahead of the inflamation and eventually correct itself.   I highly recommend it.  It’s not expensive and it’s not perscription.

Another trick to try if you’re in a bind and you have to play but the pain is taking over.  WD40!  Yup sounds crazy.  A great guitar player friend of mine told me about it.  Spray some of it on the affected area an hour or so before you play.  I don’t recommend using it ongoing being a petroleum product but it might help you through a one time emergency…

Cheers and good health!

 

 

 

Share : facebooktwittergoogle plus
pinterest

Studio Drummer – Know When Not To Be Overruled By A Producer

I’m going to be short and sweet about this but let me say this.  You have to know when to stand your ground as a player.  This is especially relevent if you’re in a band.  Don’t get me wrong, producers are a necessary and vital element in a music production.  There is a constant issue that arises though.  The issue is that producers often like to change things, change ideas for the sake of change and also to be able to lay claim to those changes.  A producer may usually have the final say and it’s important to respect that.  However you may have times when you feel strongly about a musical issue, or a concept that you’ve worked out that you want to contend for.  Times happen when you have to stand for those ideas, as uncomfortable as they may be.
I’ve been in band situations where parts and musical ideas have been very worked out.  They also hold a certain band dynamic, an energy if you will, that embodies the song or at least the version of the song that you’ve collectively created.  I’ve seen situations and been a part of them where a ‘producer’ will come in and run roughshod over everything you’ve worked on.  The problem that also arises is that there’s times when these producers have been brought in at good expense.

There does come a time when you have to contend for your ideas, your vision and concepts.  That can be like running into a brick wall at time when you’re trying to bring your most harmonious performance without and blockage and bad energy..

There lies the rub as they say..  It’s a balance of maintaining creativity against the machine in a sense.  The ‘machine’ can be the producer, the ego, the overbearing domination at times but .. that’s what I leave you to think about.

How much do you trust your concepts, your ideas and also equally important, how much are you willing to be a student, to have open ears and be willing to accept change and adapt and incorporate others ideas?

It’s a challenge isn’t it?  I’ve experienced it and it’s still a challenge to this day.  However there are times that I strongly contend for my position when I feel it’s in the best interest of the song and the artist, even if it is uncomfortable.  The song and the integrity of the project have to override not only the players views but also the producer’s at times as well.  A great producer will accept a contending viewpoint, at least as an alternative if it is presented properly and respectfully by you as the musician.

 

 

Share : facebooktwittergoogle plus
pinterest

Studio Drummer – Introduction to DAW Recording

DAW DRUMS AND EDITING

 

 

For those uninitiated in the term, DAW refers to ‘digital audio workstation’: the short-form terminology commonly used these days.  Modern recording has moved almost entirely away from linear analog tape to computer-based systems of numerous varieties.  Of course the most common, and considered by most to be the industry standard is Pro Tools.  But there are many platforms these days, some of which are considered superior sonically to Pro Tools.

Platforms such as Radar and Saw for example are considered superior in sonic quality.  There are many other fine platforms such as Logic Audio, Sonar, Cubase, Nuendo, Digital Performer and the list grows daily!

 

Having said what I have about platforms this is not intended to be a recording seminar and I’d advise you to dig deep into the many source materials that exist about recording platforms and techniques.  If your intent is to also develop engineering capabilities so you can effectively record yourself, then again I would recommend separate studies in this area.

However it is good, as I will show, to have a general knowledge of platforms and the way that drum-editing takes place on these platforms as well as some of the pitfalls that can befall your performances along with the advantages that they create!

 

The move away from analog tape recording, as I’ve mentioned elsewhere is unfortunate for the modern day studio musician in general.  What is unfortunate is that less than 15 years ago you as a session player you would be required to play an entire ‘take’ (terminology used meaning an entire pass of the piece of music.)  There was no time shifting or repairing. 

 

Stay tuned for more on DAW and home studio recording…

Share : facebooktwittergoogle plus
pinterest

Studio Drummer – Final thought regarding Chart Reading!

*FINALLY…*

 

 

This skill is one that just cannot be overlooked.  Decide to dedicate a percentage of your practice and attention to it. 

 

*REMEMBER*

 

If you can read competently as a drummer it puts you immediately into different league and will open up many new avenues of work!

Share : facebooktwittergoogle plus
pinterest

1 2 3